Drip line under a corner or seam
A stain, mud line, or eroded dirt directly under one spot on the gutter usually means that joint is leaking.

Most gutter leaks come from a few known spots — end caps, mitered corners, and seams. We seal them with the right product while we're already up there.
A leaking gutter doesn't have to mean a full replacement. Most leaks show up in the same places every time: the end caps, the mitered corners at each turn, and the seams where two sections meet. A proper cleaning, dry surface, and the right sealant handles the majority of them.
During a cleaning we look at every seam and end cap. When we find a leak, we clean the joint back to metal, let it dry, and lay a bead of exterior-grade gutter sealant. On a normal seam that's a 10-minute fix that adds years to the system.
We're transparent about limits: sealant is the right answer for small seam leaks and pinhole spots. If a gutter is rusted through, badly pitched, or coming loose from the fascia, sealing it is a band-aid — we'll say so and point you toward the right fix.
Any one of these is worth a look. Two or more usually means the problem's been quietly building.
A stain, mud line, or eroded dirt directly under one spot on the gutter usually means that joint is leaking.
End caps are the most common leak on aluminum gutters — they get bumped, flex, and pull away from the sealant bead.
Water sitting at a joint slowly corrodes it. Caught early, sealant stops the leak — caught late, that section needs replacement.
We won't seal a dirty joint. Sealant only bonds to a clean, dry gutter.
We work section by section and mark each spot that needs sealant.
We use gutter-specific sealant that stays flexible in Tennessee heat and cold. Silicone-caulk-from-the-hardware-aisle is not the right product.
You get a photo of every seam we sealed. Full cure takes 24 hours; we advise avoiding forced water over sealed joints for a day.
Sealing is quoted per repair, not per house. Small jobs (one or two end caps and a seam) are usually a modest add-on to a cleaning. Larger jobs we quote after we see how many joints are involved.
Sealing extends the life of a working gutter — it isn't a substitute for replacement on a badly damaged or improperly pitched system.
A properly applied bead on a clean joint usually lasts 5–10 years. Sunlight, thermal cycling, and the movement of the gutter itself all shorten that; a north-facing seam typically lasts longer than a south-facing one.
We can identify them, but sealant needs a dry, clean surface to bond. We'll schedule the actual sealing for a dry day — often the same visit if the sun catches up.
That usually means the gutter is either misaligned, rusted through, or has failed at the hangers. Sealing every joint doesn't fix any of those, and we'll tell you honestly if replacement is the smarter money.
Professional gutter cleaning with commercial vacuum equipment when appropriate, complete downspout clearing, a final system inspection, and before & after photos on every job.
Learn moreClogged downspouts fully cleared end-to-end — the piece most gutter jobs skip.
Learn moreLoose hangers, small leaks, separated joints, and pulled-away sections tightened during your visit.
Learn moreFailed or clogged gutter guards removed so gutters can actually be cleaned properly again.
Learn moreMost gutter sealing quotes come back the same day. No pressure, no obligation — just an honest number.